Problem Symptoms Table
WARNING: This page is about a different variant/trim than selected.
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
ENGINE IMMOBILISER SYSTEM
| Symptom | Suspected Area | Refer to |
|---|---|---|
| Hybrid control system does not start. | Key | Refer to DATA LIST / ACTIVE TEST |
| Smart key system (for start function) | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Hybrid control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Security indicator light does not blink. | Certification ECU (smart key ECU assembly) | Refer to Security Indicator Light Does not Blink |
| Wire harness or connector | - | |
| No. 3 meter circuit plate | - |