Air Conditioning Pressure Sensor: Installation: Installation
WARNING: This page is about a different variant/trim than selected.
- INSTALL AIR CONDITIONING PRESSURE SENSOR
- Sufficiently apply compressor oil to a new air conditioning pressure sensor.
Compressor oil
ND-OIL 11 or equivalent
NOTE:- Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign objects.
- Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is used, compressor motor insulation performance may decrease, resulting in a leakage of electric power.
- Install the new air conditioning pressure sensor.
Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
NOTE:- Do not deform the piping.
- Make sure to confirm that the piping does not disengage from the plastic clamp.
- Connect the connector.
- Sufficiently apply compressor oil to a new air conditioning pressure sensor.
- CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT See step 2
- WARM UP COMPRESSOR See step 3
- INSPECT FOR REFRIGERANT LEAK See step 4