LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Four >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System (Diagnostics - Introduction) (Except Plug-In) >> Wireless Door Lock Control System >> Customize Parameters >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body or Illuminated Entry / Utility / Customize.
    5. Select the setting by referring to the table below.
    WIRELESS DOOR LOCK CONTROL SYSTEM

    Display (item) Default Function Setting
    Wireless Control ON Function that turns wireless door lock function on or off ON or OFF
    Hazard Answer Back ON When the doors are locked by wireless operation, the hazard warning lights flash once.
    When the doors are unlocked by wireless operation, the hazard warning lights flash twice.    		 ON or OFF
    Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF
    Unlock 2 Operation ON Function that unlocks driver door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON or OFF
    Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
    Auto Lock Time 60 s*1 or 30 s*2 Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s
    Wireless Auto Lock ON This function turns the wireless auto lock function on or off. ON or OFF
    Wireless Buzzer Resp ON Wireless door lock buzzer response ON or OFF
    Wireless Buzzer Vol Level7 Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0
    • *1: except for Korea
    • *2: for Korea
    ILLUMINATED ENTRY

    Display Default Content Setting
    Lighting Time 15 s Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s
  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY 

    HINT: 

    The items in the table below can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current setting before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Remote 2-Press Unlock On Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock. On or Off Main body ECU (Multiplex network body ECU)
        Auto Relock Timer 60 s*1
        30 s*2        		 Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Lights On When the doors are locked by wireless operation, the hazard warning lights flash once.
        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.        		 On or Off Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Tone 7 Wireless door lock buzzer volume Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)
        • *1: except Korea
        • *2: for Korea
    2. Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Remote 2-Press Unlock On Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock. On or Off Main body ECU (Multiplex network body ECU)
        Lock Feedback Volume 7 Wireless door lock buzzer volume Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals