How To Proceed With Troubleshooting

HINT: 

Use the following procedure to troubleshoot the vehicle proximity notification system.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK 

   NEXT: Go to next step 

3. INSPECT AUXILIARY BATTERY VOLTAGE 
   1. Measure the auxiliary battery voltage with the power switch off.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      NEXT: Go to next step 

4. PROBLEM SYMPTOMS TABLE 

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table.	A
   Fault is listed in Problem Symptoms Table.	B

   B → Go to step   6 

   A: Go to next step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. Terminals of ECU. Refer to TERMINALS OF ECU 

      NEXT: Go to next step 

6. REPAIR OR REPLACE 

   NEXT: Go to next step 

7. CONFIRMATION TEST 

   NEXT → END