Check For Intermittent Problems
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR INTERMITTENT PROBLEMS
- Perform a simulation test. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
.
- Reproduce the plug-in charging status when a malfunction occurred based on the interview sheet, freeze frame data recorded when the DTC was stored and freeze frame data recorded in Charge Cancel History.
- Check the connector(s) and terminal(s). Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE .
- Wiggle the harness and connector(s). Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
- Heat or cool suspected parts. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
- Perform a simulation test. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
.