LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Four >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) (Except Plug-In) >> Crankshaft Position Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE REAR ENGINE UNDER COVER RH 
  2. REMOVE NO. 1 ENGINE UNDER COVER 
  3. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
      Fig 1: Identifying Crank Position Sensor Connector
      GTY224176Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crank position sensor.
      Fig 2: Identifying Crank Position Sensor & Bolt
      GTY231952Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals