Heated Oxygen Sensor: Inspection: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT HEATED OXYGEN SENSOR
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 TEXT IN ILLUSTRATION
| *1 |
Component without harness connected
(Heated Oxygen Sensor) |
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| (HT) - (+B) |
20°C (68°F) |
11 to 16 Ω |
| (HT) - (E) |
- |
10 kΩ or higher |
If the result is not as specified, replace the heated oxygen sensor.