LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Four >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Wireless Door Lock Control System (Diagnostics - Introduction) (Plug-In)) >> Wireless Door Lock Control System >> Customize Parameters >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

WARNING: This page is about a different variant/trim than selected.
  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Techstream
      1. Connect the Techstream.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Wireless Door Lock.
      5. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Wireless Control ON Function that turns wireless door lock/ON or OFF ON or OFF Main body ECU (Multiplex network body ECU)
        Hazard Answer Back ON When the doors are locked by wireless operation, the hazard warning lights flash once.
        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
        ON or OFF Main body ECU (Multiplex network body ECU)
        Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF Main body ECU (Multiplex network body ECU)
        Unlock 2 Operation ON Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON or OFF Main body ECU (Multiplex network body ECU)
        Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on electrical key transmitter sub-assembly for 0.8 seconds ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Lock Time 60 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Wireless Auto Lock ON This function turns the wireless auto lock function on or off. ON or OFF Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Resp ON Wireless door lock buzzer response/ON or OFF ON or OFF Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Vol Level7 Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Main body ECU (Multiplex network body ECU)
    2. Customizing with the Multi-display (for Navigation Receiver Type)
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Setting.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Remote 2-Press Unlock On Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. On or Off Main body ECU (Multiplex network body ECU)
        Auto Relock Time 60 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Lights On When the doors are locked by wireless operation, the hazard warning lights flash once.
        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
        On or Off Main body ECU (Multiplex network body ECU)
        Lock Feedback Volume 7 Wireless door lock buzzer volume 0, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)
    3. Customizing with the Multi-display (for Radio and Display Type)
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Remote 2-Press Unlock On Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. On or Off Main body ECU (Multiplex network body ECU)
        Lock Feedback Volume 7 Wireless door lock buzzer volume 0, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)