Lin Communication System: Precaution: Precaution

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

System Name	See Procedure
Power Door Lock Control System	Refer to INITIALIZATION

PRECAUTIONS WHEN USING TECHSTREAM
1. When using the Techstream to troubleshoot with the power switch off:
  Connect the Techstream to the DLC3, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.
2. After all DTCs are cleared, check if the DTC is stored again 10 seconds after the power switch is turned on (IG).