Service Data
VEHICLE HEIGHT (UNLOADED VEHICLE)
| Front C - A | Rear D - B |
| 108 mm (4.25 in.) | 26 mm (1.02 in.) |
Measurement points:
- A: Ground clearance of front lower No. 1 suspension arm bushing set bolt center
- B: Ground clearance of rear axle beam bushing set bolt center
- C: Ground clearance of front wheel center
- D: Ground clearance of rear wheel center
CAMBER (UNLOADED VEHICLE)
| - | Camber Inclination | Right-left Difference |
| Front | -0°13' +/- 45' (-0.22° +/- 0.75°) | 45' (0.75°) or less |
| Rear | -1°29' +/- 30' (-1.48° +/- 0.50°) | 30' (0.50°) or less |
CASTER (UNLOADED VEHICLE)
| - | Caster Inclination | Right-left Difference |
| Front | 5°53' +/- 45' (5.88° +/- 0.75°) | 45' (0.75°) or less |
STEERING AXIS INCLINATION (UNLOADED VEHICLE)
| - | Steering Axis Inclination Reference |
| Front | 12°16' (12.27°) |
TOE-IN (UNLOADED VEHICLE)
| - | Specified Condition | Right-left Difference |
| Front | C + D: 0°12' +/- 0°12' (0.20° +/- 0.20°) | - |
| B - A: 2.0 +/- 2.0 mm (0.0787 +/- 0.0787 in.) | ||
| Rear | C + D: 0°17' +/- 18' (0.29° +/- 0.30°) | 45' (0.75°) or less |
| B - A: 2.9 +/- 3 mm (0.114 +/- 0.118 in.) | - |
WHEEL TURNING ANGLE (UNLOADED VEHICLE)
| - | Inside Wheel | Outside Wheel Reference |
| Front | 40°50' +/- 2° (40.83° +/- 2°) | 33°50' (33.83°) |