Room Temperature Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL ROOM TEMPERATURE SENSOR
1. Engage the 2 claws to install the room temperature sensor to the No. 1 switch hole base.
  
  Fig 1: Identifying No. 1 Switch Hole Base, Room Temperature & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 SWITCH HOLE BASE . Refer to INSTALLATION - Step 20
INSTALL UPPER INSTRUMENT PANEL FINISH PANEL ASSEMBLY . Refer to INSTALLATION - Step 21
INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL AIR CONDITIONING CONTROL ASSEMBLY See step 1
INSTALL CONSOLE BOX ASSEMBLY . Refer to INSTALLATION - Step 24
INSTALL BOX BOTTOM MAT . Refer to INSTALLATION - Step 25
INSTALL FRONT NO. 2 CONSOLE BOX INSERT . Refer to INSTALLATION - Step 26
INSTALL FRONT NO. 1 CONSOLE BOX INSERT . Refer to INSTALLATION - Step 27
INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET . Refer to INSTALLATION - Step 28
INSTALL ELECTRICAL KEY OSCILLATOR . Refer to INSTALLATION - Step 1
INSTALL REAR CONSOLE BOX ASSEMBLY
Refer to INSTALLATION
INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 27
INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH . Refer to INSTALLATION - Step 28
INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 30
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY . Refer to INSTALLATION - Step 31
INSPECT SHIFT LEVER . Refer to INSTALLATION - Step 8