Cruise Control Switch Circuit: Description

WARNING: This page is about a different variant/trim than selected.

The cruise control main switch operates 8 functions: SET, -(COAST), TAP-DOWN, RES (RESUME), + (ACCEL), TAP-UP, CANCEL, and MODE. The SET, TAP-DOWN, and - (COAST) functions, and the RES (RESUME), TAP-UP, and + (ACCEL) functions are operated with the same switch. The cruise control main switch is an automatic return type switch which turns on only while it is being operated it in the direction of each arrow and turns off after being released. The internal contact points of the cruise control main switch are turned on with the switch operation. The driving support ECU then reads the voltage value that has been changed by the switch operation to control MODE, SET, - (COAST), RES (RESUME), + (ACCEL), and CANCEL. The dynamic radar cruise control system has two cruise control modes: constant speed control mode and vehicle-to-vehicle distance control mode.

Vehicle-to-vehicle distance control mode is always selected when starting up the dynamic radar cruise control system.
The operation of constant speed control mode is the same as that for a conventional cruise control system.