Camshaft Position Sensor: Removal: Removal

HINT: 

Although the part name refers to the No. 1 crank position sensors, this procedure is for the camshaft position sensors.

1. REMOVE NO. 2 CYLINDER HEAD COVER  . Refer to REMOVAL - Step 29
2. REMOVE NO. 1 CRANK POSITION SENSOR 
   1. Disconnect the No. 1 crank position sensor connector.
      Fig 1: Identifying No. 1 Crank Position Sensor Connector & Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and No. 1 crank position sensor.