LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Three >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 2 (Hybrid Battery Control System (Service Information) (Plug-In)) >> Sub Radiator >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sub Radiator: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL RADIATOR ASSEMBLY 
    1. Install the radiator assembly to the condenser assembly with the 4 bolts.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE:

      Do not remove the pieces of cloth or plastic bags from the pipes and disconnected hoses until installation.

  2. INSTALL COOLER CONDENSER ASSEMBLY 

    Refer to INSTALLATION .