Skid Control Buzzer: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the auxiliary battery is connected.

REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
Refer to REMOVAL
REMOVE SKID CONTROL BUZZER ASSEMBLY
1. Disengage the clamp to remove the skid control buzzer assembly.
  
  Fig 1: Identifying Skid Control Buzzer Assembly & Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the skid control buzzer connector.