DTC P3011-123: Battery Block 1 Becomes Weak; DTC P3012-123: Battery Block 2 Becomes Weak; DTC P3013-123: Battery Block 3 Becomes Weak; DTC P3014-123: Battery Block 4 Becomes Weak; DTC P3015-123: Battery Block 5 Becomes Weak; DTC P3016-123: Battery Block 6 Becomes Weak; DTC P3017-123: Battery Block 7 Becomes Weak; DTC P3018-123: Battery Block 8 Becomes Weak; DTC P3019-123: Battery Block 9 Becomes Weak; DTC P3020-123: Battery Block 10 Becomes Weak; DTC P3021-123: Battery Block 11 Becomes Weak; DTC P3022-123: Battery Block 12 Becomes Weak; DTC P3023-123: Battery Block 13 Becomes Weak; DTC P3024-123: Battery Block 14 Becomes Weak: Procedure

B → GO TO  DIAGNOSTIC TROUBLE CODE CHART 

A: Go to next step 

B → See step   3 

A → See step   5 

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
4. Check if DTCs are output.
   RESULT
   
   

   Result	Proceed to
   DTC P3015-123 is output.	A
   DTC P3015-123 is not output.	B

5. Turn the power switch off.

B → See step   4 

A → REPLACE SERVICE PLUG GRIP AND HV BATTERY ASSEMBLY