LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Two >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Smart Key System (For Start Function) (Diagnostic Codes & Symptom Tests) (Except Plug-In) >> SMART KEY SYSTEM (for Start Function) >> Symptom Tests >> Power Source Mode does not Change to ON (IG) >> Wiring Diagram
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Source Mode does not Change to ON (IG): Wiring Diagram

Refer to DTC B2271. Refer to DTC B2271: Ignition Hold Monitor Malfunction .