Inspection Procedure
WARNING: This page is about a different variant/trim than selected.
NOTE:
- When this DTC is output, a malfunction in the electronically controlled brake system is suspected. Check if the electronically controlled brake system is functioning normally. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
- When this DTC is output, a malfunction in the lighting system is suspected. Check if the lighting system is functioning normally. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
HINT:
- This circuit uses CAN communication. Therefore, be sure to check that the CAN communication system is normal before performing inspection.
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.