LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Two >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures (Except Plug-In) >> Common Specs & Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Common Specs & Procedures

PRIUS (BASE) COMMON SPECS & PROCEDURES

System Specification/Procedure
Air Conditioning
Service SERVICE DATA
Torque TORQUE SPECIFICATIONS
Axle Nut/Hub Nut
Front 216 N.m (2, 203 kgf.cm, 159 ft. lbf)
Rear 90 N.m (918 kgf.cm, 66 ft. lbf)
Battery SERVICE DATA
Brakes
Bleeding Sequence BLEEDING
Disc \ Drum
Front SERVICE DATA
Rear SERVICE DATA
Torque
Front TORQUE SPECIFICATIONS
Rear TORQUE SPECIFICATIONS
Charging
Generator SERVICE DATA
Torque TORQUE SPECIFICATIONS
Engine Cooling
General Service Specifications SERVICE DATA
Radiator Cap Pressure 94 to 122 kPa (1.0 to 1.2 kgf/cm2 , 13.5 to 17 psi)
Thermostat R & I THERMOSTAT
Water Pump R & I WATER PUMP
Engine Mechanical
Compression SERVICE DATA
Oil Pressure at idle speed: 60 kPa (0.6 kgf/cm2 , 8.7 psi) or more
at 2500 RPM: 142 kPa (1.4 kgf/cm2 , 21 psi)
Overhaul SERVICE DATA
Torque TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE tab.
Flywheel/Flex Plate (Drive Plate) Torque (1st) 49 N.m (500 kgf.cm, 36 ft. lbf)
(2nd) Turn 90°
Fuel System
Pressure Specification @ idle, 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44 to 50 psi)
5 min. after engine has stopped, 147 kPa (1.5 kgf/cm2 , 21 psi) or more
Fuel Pressure Test Procedure ON-VEHICLE INSPECTION
Ignition
Firing Order & Cylinder Identification FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug
(Type: DENSO SC20HR11)
Gap Standard, 1.0 to 1.1 mm (0.039 to 0.043 in.)
Maximum, 1.3 mm (0.0512 in.)
Torque 20 N.m (204 kgf.cm, 15 ft.lb)
Starting
Starter SERVICE DATA
Wheel Alignment
Adjustment Specifications SERVICE DATA
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Wheel Lug Nut Torque 103 N.m (1, 050 kgf.cm, 76 ft. lbf)