LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius V >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Smart Key System (For Entry Function) (Diagnostic Codes & Symptom Tests) >> Smart Key System (For Entry Function) >> DTC B27A2: Open in Front Passenger Side Electrical Antenna Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

NOTE:
  • The smart key system (for Entry Function) uses a multiplex communication system (LIN communication system) and the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING . Troubleshoot the smart key system (for Entry Function) after confirming that the communication systems are functioning properly.
  • When using the Techstream with the power switch off to troubleshoot:

    Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.

  • Before replacing the certification ECU (smart key ECU assembly), refer to the smart key system (for Entry Function). Refer to PRECAUTION .
  • After repair, confirm DTC not reoccur with performing the "DTC Output Confirmation Operation".
  • Front door outside handle assembly (front passenger door) has an antenna coil between ANT1 and ANT2 terminals.
scientia non olet · About LEMON Manuals