LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> RAV4 EV >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System (Diagnostic Codes & Symptom Tests) (Electric) >> Can Communication System >> Symptom Tests >> Navigation Receiver Assembly Communication Stop Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Receiver Assembly Communication Stop Mode: Description

Detection Item Symptom Trouble Area
Navigation Receiver Assembly Communication Stop Mode Either condition is met:
  • "Display and Navigation (AVN1)" is not displayed on the "Bus Check" screen.
  • "Navigation Receiver Assembly Communication Stop Mode" in "DTC Communication Table" applies.
  • Power source or inside of navigation receiver assembly
  • Navigation receiver assembly CAN branch wire or connector
  • Navigation receiver assembly
scientia non olet · About LEMON Manuals