Key-off Operation Function Operates even if Operating Conditions are not Satisfied: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MAIN BODY
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Communication D-Door Motor	Connection status between front power window regulator motor assembly LH and main body ECU (instrument panel junction block assembly) / OK or STOP	OK: Normal communication STOP: Communication stopped	-

   OK

   On the Techstream screen, OK is displayed.

NG → See step   5 

OK: Go to next step 

1. Check the power window operation function after the power switch is turned off.
   RESULT
   
   

   Result	Proceed to
   When power window can still be operated even after opening driver door or front passenger door within approximately 45 seconds of power switch being turned off	A
   When power window can still be operated even after approximately 45 seconds have elapsed after power switch is turned off	B

B → See step   6 

A: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MAIN BODY
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   FR Door Courtesy	Front door courtesy light switch RH / ON or OFF	ON: Front door RH closed OFF: Front door RH open	-
   FL Door Courtesy	Front door courtesy light switch LH / ON or OFF	ON: Front door LH closed OFF: Front door LH open	-

   OK

   On the Techstream screen, ON or OFF is displayed accordingly.

NG → See step   4 

OK → REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)