Occupant Classification System: Precaution: Precaution
WARNING: This page is about a different variant/trim than selected.
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTE:
- After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work. Refer to PRECAUTION .
- When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- GENERAL PRECAUTION
Perform zero point calibration and sensitivity check if any of the following conditions occur:
- The occupant detection ECU is replaced.
- Accessories (seatback tray and seat cover, etc.) are installed.
- The front passenger seat is removed from the vehicle.
- One of the bolts that is used to install the front passenger seat is removed and reinstalled.
- The vehicle is brought to the workshop for repair due to an accident or a collision.