System Description

WARNING: This page is about a different variant/trim than selected.

LIN COMMUNICATION SYSTEM DESCRIPTION

The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.

HINT:

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.
In the following table, "◦" indicates that the function applies, and "-" indicates that it does not.

DOOR BUS LINES

Component	Master Control	LIN Communication DTC Output Function
Main body ECU (instrument panel junction block assembly)	◦	◦
Front power window regulator motor assembly LH	-	-

CERTIFICATION BUS LINES

Component	Master Control	LIN Communication DTC Output Function
Certification ECU (aggregation box ECU assembly)	◦	◦
Main body ECU (instrument panel junction block assembly)	-	◦
Steering lock actuator assembly	-	-
ID code box (immobiliser code ECU)	-	-

AIR CONDITIONING BUS LINES

Component	Master Control	LIN Communication DTC Output Function
Air conditioning amplifier assembly	◦	◦
Air conditioning control assembly	-	-