Problem Symptoms Table
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
SMART KEY SYSTEM (FOR START FUNCTION)
| Symptom | Suspected Area | See |
|---|---|---|
| Power Source Mode does not Change to ON (IG and ACC) | Refer to "Power Source Mode does not Change to ON (IG and ACC)" | Refer to Power Source Mode does not Change to ON (IG and ACC) |
| Smart key system (for Entry function) | - | |
| AM2 No. 2 fuse | - | |
| Power management control ECU | - | |
| Engine switch | - | |
| Wire harness or connector | - | |
| Power Source Mode does not Change to ON (IG) | Refer to "Power Source Mode does not Change to ON (IG)" | Refer to Power Source Mode does not Change to ON (IG) |
| AM2 No. 2 fuse | - | |
| IG1 relay | - | |
| IG2 relay | - | |
| Instrument panel junction block assembly | - | |
| Engine room relay block | - | |
| Power management control ECU | - | |
| Wire harness or connector | - | |
| Power Source Mode does not Change to ON (ACC) | Refer to "Power Source Mode does not Change to ON (ACC)" | Refer to Power Source Mode does not Change to ON (ACC) |
| AM2 No. 2 fuse | - | |
| ACC relay | - | |
| Instrument panel junction block assembly | - | |
| Power management control ECU | - | |
| Wire harness or connector | - | |
| Engine does not Start | Refer to "Engine does not Start" | Refer to Engine does not Start |
| Smart key system (for Entry function) | - | |
| Starter relay | - | |
| Engine room relay block | - | |
| Park/neutral position switch | - | |
| Engine immobilizer system | - | |
| Steering lock system | - | |
| SFI system | - | |
| Power management control ECU | - | |
| Wire harness or connector | - |