LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Sienna XLE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE) (Service Information) >> Crankshaft Position Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE W/PULLEY COMPRESSOR ASSEMBLY 

    Refer to REMOVAL

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      Fig 1: Locating Crankshaft Position Sensor, Connector & Fastener
      GTY298011Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and the crankshaft position sensor.
scientia non olet · About LEMON Manuals