Air Fuel Ratio Sensor: Removal: Removal

REMOVE COOL AIR INTAKE DUCT SEAL . Refer to REMOVAL - Step 17
REMOVE V-BANK COVER SUB-ASSEMBLY . Refer to REMOVAL - Step 18
REMOVE AIR FUEL RATIO SENSOR NO. 2 (for Bank 2 Sensor 1)
1. Disconnect the air fuel ratio sensor connector, and separate the wire harness clamp.
  
  Fig 1: Locating Air Fuel Ratio Sensor Connector And Wire Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
  
  Fig 2: Removing Air Fuel Ratio Sensor Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - SST: 09224-00010
REMOVE FRONT DOOR SCUFF PLATE LH . Refer to REMOVAL - Step 1
REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH . Refer to REMOVAL - Step 2
REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY . Refer to REMOVAL - Step 8
REMOVE MANIFOLD STAY . Refer to REMOVAL - Step 9
REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH . Refer to REMOVAL - Step 10
REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
1. Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
  
  Fig 3: Removing Air Fuel Ratio Sensor Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - SST: 09224-00010