Diagnostic Trouble Code Chart [08/2013 - ]
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See" below.
POWER STEERING SYSTEM
| DTC Code | Detection Item | Return-to-normal | See |
|---|---|---|---|
| C1541 | Vehicle Speed Signal | After normal confirmation | Refer to DTC C1541: Vehicle Speed Signal [08/2013 - ] |
| C1544 | High Engine Revolution Signal | After normal confirmation | Refer to DTC C1544: High Engine Revolution Signal [08/2013 - ] |
| C15F0 | VFC Solenoid Circuit | Ignition switch turned to ON again | Refer to DTC C15F0: VFC Solenoid Circuit [08/2013 - ] |
| C15F1 | Steering Angle Sensor Circuit | After normal confirmation | Refer to DTC C15F1: Steering Angle Sensor Circuit [08/2013 - ] |
| U0100 | Lost Communication with ECM / PCM "A" | After CAN communication system returns to normal condition or ignition switch turned to ON again | Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module [08/2013 - ] |
| U0126 | Lost Communication with Steering Angle Sensor Module | After CAN communication system returns to normal condition or ignition switch turned to ON again | Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module [08/2013 - ] |
| U0129 | Lost Communication with Brake System Control Module | After CAN communication system returns to normal condition or ignition switch turned to ON again | Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module [08/2013 - ] |