Precaution [08/2013 - 08/2016]
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.
System Name See Procedure Air Conditioning System (for Automatic Air Conditioning System) Refer to INITIALIZATION [08/2013 - 08/2015] Refer to INITIALIZATION [08/2015 - 08/2016] - PRECAUTIONS WHEN USING TECHSTREAM
- After all DTCs are cleared, check if the malfunction occurs again 6 seconds after turning the ignition switch ON.
- PRECAUTIONS FOR THE DOOR CONTROL TRANSMITTER ASSEMBLY
- The door control transmitter assembly is a precision instrument. Be sure to observe the following:
- Do not drop or strike the door control transmitter assembly.
- Do not allow the door control transmitter assembly to be kept in a high temperature place for a long time.
- Do not use an ultrasonic washing machine to clean the door control transmitter assembly.
- Keep the door control transmitter assembly away from magnets or magnetized items during use.
- Do not attach any stickers to the door control transmitter assembly.
- The door control transmitter assembly is a precision instrument. Be sure to observe the following:
- PRECAUTION FOR REGISTRATION
- If replacing any of the following parts, refer to Registration.
Refer to REGISTRATION [08/2013 - ]
NOTE:Any door control transmitter assemblies or ECUs for which registration has been performed cannot be reused.
- Door control transmitter assembly
- Transponder key ECU assembly
- ECM
- If replacing any of the following parts, refer to Registration.