LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> FJ Cruiser 4WD, Part Time T/Case Control >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> ECM >> Installation [08/2013 - ] >> Installation [08/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [08/2013 - ]

  1. INSTALL NO. 2 ECM BRACKET 
    1. Install the No. 2 ECM bracket with the 2 screws.

      Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf) 

  2. INSTALL ECM BRACKET 
    1. Install the ECM bracket with the 2 screws.

      Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf) 

  3. INSTALL ECM 
    1. Install the ECM with the 3 nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 6 connectors.
  4. INSTALL 4 WHEEL DRIVE CONTROL ECU NO. 2 (for Automatic Transmission 4WD) 
    1. Install the four wheel drive control ECU with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Connect the connector.
  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to INSTALLATION [08/2013 - ] - Step 28
  6. PERFORM INITIALIZATION  See step  6
scientia non olet · About LEMON Manuals