DTC P0111: Intake Air Temperature Sensor Gradient Too High [08/2013 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read DTCs.
   RESULT
   
   

   Result	Proceed to
   P0111 and other DTCs are output	A
   P0111 is output	B

   HINT: 

   • If any DTCs other than P0111 are output, troubleshoot those DTCs first.
   • Perform "Inspection After Repair" after replacing the mass air flow meter. Refer to INITIALIZATION [08/2013 - ] .

B → See step   3 

A → See step   2