LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius C Two >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Window Control System (Diagnostic Codes & Symptom Tests) >> Power Window Control System >> Symptom Tests >> Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [12/2013 - ] >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ] . Troubleshoot the power window control system after confirming that the communication system is functioning properly.
  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [12/2013 - ] .
  • When the ECU determines that the power window regulator motor assembly LH (for driver door) has a malfunction, DTC B2311 is stored.
scientia non olet · About LEMON Manuals