Installation [10/2013 - ]

HINT: 

Perform "Inspection After Repair" after replacing the air fuel ratio sensor. Refer to INITIALIZATION [10/2013 - ] .

1. Using SST, install the air fuel ratio sensor.
   Fig 1: Installing Fuel Ratio Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09224-00010 

   without SST 

   Torque: 44 N*m (449 kgf*cm, 32 ft.*lbf) 

   with SST 

   Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

   NOTE:

   • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 260 mm (10.2 in.). Refer to PRECAUTION [10/2013 - ] .
   • The "with SST" torque value is effective when SST is parallel to the torque wrench.
2. Connect the air fuel ratio sensor connector and clamp.
   Fig 2: Identifying Air Fuel Ratio Sensor, Connector & Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the windshield wiper motor and link. Refer to INSTALLATION [10/2013 - ] .

1. Perform "Inspection After Repair" after replacing the air fuel ratio sensor. Refer to INITIALIZATION [10/2013 - ] .