DTC P3011-123: Battery Block 1 Becomes Weak; DTC P3012-123: Battery Block 2 Becomes Weak; DTC P3013-123: Battery Block 3 Becomes Weak; DTC P3014-123: Battery Block 4 Becomes Weak; DTC P3015-123: Battery Block 5 Becomes Weak; DTC P3016-123: Battery Block 6 Becomes Weak; DTC P3017-123: Battery Block 7 Becomes Weak; DTC P3018-123: Battery Block 8 Becomes Weak; DTC P3019-123: Battery Block 9 Becomes Weak; DTC P3020-123: Battery Block 10 Becomes Weak; DTC P3021-123: Battery Block 11 Becomes Weak; DTC P3022-123: Battery Block 12 Becomes Weak; DTC P3023-123: Battery Block 13 Becomes Weak; DTC P3024-123: Battery Block 14 Becomes Weak [10/2013 - ]: Description
- Refer to the Description for DTC P0A80-123. Refer to DESCRIPTION .
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P3011-123 P3012-123 P3013-123 P3014-123 |
An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic) |
|
| P3015-123 | An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic) |
|
| P3016-123 P3017-123 P3018-123 P3019-123 P3020-123 P3021-123 P3022-123 P3023-123 P3024-123 |
An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic) |
|
HINT:
- These DTCs can be stored after clearing DTCs and driving the vehicle for approximately 10 minutes.
- These DTCs are stored when a malfunction is detected in the HV battery or a battery smart unit. However, depending on the driving conditions, the malfunction may not be reproduced if the status of the HV battery changes. If internal resistance is abnormal, the voltage of the battery blocks indicated by the DTCs are likely to decrease more than others blocks voltage during acceleration (discharging), and increase more during deceleration (charging).
- When the HV battery is malfunctioning:
- - Voltage of 1 or a few battery blocks has dropped.
- - Voltage of all battery blocks is output randomly with no certain pattern.
- When the battery smart unit is malfunctioning:
- - Differences in battery block voltages have a certain pattern.
- When the HV battery is malfunctioning:
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P3011-123 P3012-123 P3013-123 P3014-123 P3015-123 P3016-123 P3017-123 P3018-123 P3019-123 P3020-123 P3021-123 P3022-123 P3023-123 P3024-123 |
|
The following items can be helpful when performing repairs:
Data List
- State of Charge (All Bat)
- Ready Signal
- Vehicle Spd
- Accelerator Degree
- Shift Sensor Shift Pos
- Engine Revolution
- Power Resource VB
- Batt Pack Current Val
- Auxiliary Battery Vol
- Battery Low Time
- DC Inhibit Time
- SOC after IG-ON
- Status of Charge Max
- Status of Charge Min
- DTC Clear Run Distance
- Engine Run Time
Operation History Data
- Main Battery Low Voltage