LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Plug-in >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Code (P0010 - P0300)) - PRIUS (Plug-In) >> SFI System >> DTC P0010: Camshaft Position "A" Actuator Circuit (Bank 1) [10/2013 - ] >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

Monitor runs whenever the following DTCs are not stored None
All of the following conditions are met -
Starter Off
Power switch On (IG)
Time after power switch off to on (IG) 0.5 seconds or more
Either of the following conditions is met A or B
A. All of the following conditions are met -
Auxiliary battery voltage 11 V or higher, and less than 13 V
Target duty cycle Less than 70%
Current cut status Not cut
B. All of the following conditions are met -
Auxiliary battery voltage 13 V or higher
Target duty cycle Less than 80%
Current cut status Not cut