DTC Check / Clear [10/2013 - ]
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Read the DTC by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Clear the DTC by following the directions on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.