LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Plug-in >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 143 (Power Mirror Control System (Diagnostics & Symptom Tests) (Except Plug-In)) >> Power Mirror Control System >> Data List / Active Test [10/2013 - ] >> Data List / Active Test [10/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test [10/2013 - ]

WARNING: This page is about a different variant/trim than selected.
  1. ACTIVE TEST 

    HINT: 

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Air Conditioner / Active Test.
    5. Perform the Active Test according to the display on the Techstream.
      AIR CONDITIONER

      Tester Display Test Part Control Range Diagnostic Note
      Mirror Heater Relay Mirror Heater ON/OFF -
scientia non olet · About LEMON Manuals