LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Plug-in >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Immobiliser System (Diagnostics - Introduction) (Except Plug-In)) >> Engine Immobilizer System >> DTC Check / Clear [10/2013 - ] >> DTC Check / Clear [10/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [10/2013 - ]

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2013 - ] .
  2. CHECK FOR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / HV Control / Trouble Codes.
    5. Check the details of the DTC(s).

      Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2013 - ]  for engine immobilizer system)

      Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2013 - ] for hybrid vehicle control system)

  3. CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Clear the DTCs.
  4. CLEAR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / HV Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals