LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Three >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock Control System (Diagnostics & Symptom Tests) (Except Plug-In) >> Power Door Lock Control System >> Customize Parameters [10/2013 - ] >> Customize Parameters [10/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [10/2013 - ]

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Customize Setting.
    5. Select the setting by referring to the table below.
      DOOR LOCK

      Display Default Content Setting
      Unlock Key Twice ON Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF
      Auto Lock ON*1
      OFF*2      		 Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
      Auto Lock/Shift ON*2
      OFF*1      		 Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. ON or OFF
      Auto Unlock/Shift ON Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). ON or OFF
      All Unlock/Open-Close OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. ON or OFF
      • *1: for Korea
      • *2: except Korea
      ILLUMINATED ENTRY

      Display Default Content Setting
      Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).) 7.5 s, 15 s or 30 s
  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY 

    HINT: 

    The items in the table below can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current setting before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Settings / Door Lock Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Unlock on Second Key Turn On Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. On or Off Main body ECU (Multiplex network body ECU)
        Auto Lock by Speed On*1
        Off*2        		 Function that locks all doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
        Auto Lock by Shift from P On*2
        Off*1        		 Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. On or Off Main body ECU (Multiplex network body ECU)
        Auto Unlock by Shift to P On Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). On or Off Main body ECU (Multiplex network body ECU)
        Auto Unlock by Driver Door Off Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. On or Off Main body ECU (Multiplex network body ECU)
        • *1: for Korea
        • *2: except Korea
    2. Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Speed Sensitive Auto Lock Off Function that locks all doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
        Shift-Linked Auto Lock On Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. On or Off Main body ECU (Multiplex network body ECU)
        Shift-Linked Auto Unlock On Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). On or Off Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals