Installation [10/2013 - ]

INSTALL MASS AIR FLOW METER
HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter. Refer to INITIALIZATION [10/2013 - ] .
1. Install the mass air flow meter with the 2 screws.
  
  Fig 1: Identifying Mass Air Flow Meter Connector & Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Make sure that the O-ring is not cracked or does not jump out of position during installation.
2. Connect the mass air flow meter connector.
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION [10/2013 - ] - Step 97
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing the mass air flow meter. Refer to INITIALIZATION [10/2013 - ] .