Diagnosis System [10/2013 - ]
WARNING: This page is about a different variant/trim than selected.
- DESCRIPTION
The ECU stores trouble codes when malfunctions occur.
The diagnostic system allows for reading of the trouble codes from the DLC3.
Use the Techstream to help diagnose and repair the problem.
- CHECK DLC3
- Check the DLC3. Refer to GENERAL INFORMATION [10/2013 - ] .
- INSPECT AUXILIARY BATTERY VOLTAGE
- Measure the auxiliary battery voltage with the power switch off.
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery.
- Measure the auxiliary battery voltage with the power switch off.