Data List / Active Test [10/2013 - ]
WARNING: This page is about a different variant/trim than selected.
- DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE:In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Data List.
- Read the Data List according to the display on the Techstream.MAIN BODY
Tester Display Measurement Item/Range Normal Condition Diagnostic Note ACC SW Power switch ACC signal/ON or OFF ON: Power switch on (ACC)
OFF: Power switch off- IG SW Power switch IG signal/ON or OFF ON: Power switch on (IG)
OFF: Power switch off- RR Door Courtesy SW Rear door courtesy light switch RH signal/ON or OFF ON: Rear door LH open and rear door RH closed
ON: Rear door LH closed and rear door RH open
ON: Rear door LH and rear door RH open
OFF: Rear door LH and rear door RH closed- RL Door Courtesy SW Rear door courtesy light switch LH signal/ON or OFF ON: Rear door LH open and rear door RH closed
ON: Rear door LH closed and rear door RH open
ON: Rear door LH and rear door RH open
OFF: Rear door LH and rear door RH closed- Back Door Courtesy SW Back door courtesy switch signal/ON or OFF ON: Back door open
OFF: Back door closed- FR Door Lock Pos Front door unlock detection switch RH signal/ON or OFF ON: Front door RH unlocked
OFF: Front door RH locked- FR Door Courtesy SW Front door courtesy light switch RH signal/ON or OFF ON: Front door RH open
OFF: Front door RH closed- FL Door Lock Pos Front door unlock detection switch LH signal/ON or OFF ON: Front door LH unlocked
OFF: Front door LH locked- FL Door Courtesy SW Front door courtesy light switch LH signal/ON or OFF ON: Front door LH open
OFF: Front door LH closed- RR-Door Lock Pos SW Rear door unlock detection switch RH signal/ON or OFF ON: Rear door LH locked and rear door RH unlocked
ON: Rear door LH unlocked and rear door RH locked
ON: Rear door LH and rear door RH unlocked
OFF: Rear door LH and rear door RH locked- RL-Door Lock Pos SW Rear door unlock detection switch LH signal/ON or OFF ON: Rear door LH locked and rear door RH unlocked
ON: Rear door LH unlocked and rear door RH locked
ON: Rear door LH and rear door RH unlocked
OFF: Rear door LH and rear door RH locked- Interior Light Control Operation of the illuminated entry system/OFF or ON OFF: System not operated
ON: System operatedCustomized value is displayed I/L ON W/Door Key Unlock Function that lights up the interior lights when the doors are unlocked/OFF or ON OFF: Function disabled
ON: Function enabledCustomized value is displayed Lighting Time Lighting time of the delay control function (illuminated entry system)/15s, 7.5s or 30s 15s: 15 seconds
7.5s: 7.5 seconds
30s: 30 secondsCustomized value is displayed Room Light when Aprchd Function that lights up the interior lights when a key enters any actuation area/OFF or ON OFF: Function disabled
ON: Function enabledCustomized value is displayed Inside Foot Light Function that lights up the footwell lights (Always) /OFF or ON OFF: Function disabled
ON: Function enabledCustomized value is displayed I/L when ACC OFF Function that lights up the interior lights when the power switch is turned from on (IG) or on (ACC) to off/OFF or ON OFF: Function disabled
ON: Function enabledCustomized value is displayed Light Control Function that lights up the footwell lights (while Driving) /OFF or ON OFF: Function disabled
ON: Function enabledCustomized value is displayed
- ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Active Test.
- Perform the Active Test according to the display on the Techstream.MAIN BODY
Tester Display Test Part Control Range Diagnostic Note Illuminated Entry System Interior lights ON/OFF Interior light door switch DOOR and all doors closed Fr Foot Light Footwell lights ON/OFF Precondition for using the Active Test to turn lights on and off: - Power switch is turned off just before performing the Active Test.
Preconditions for using the Active Test to check dimmer controlled illumination: - Power switch is on (READY).
- A shift state other than park (P) has been selected.
SMART KEYTester Display Test Part Control Range Diagnostic Note Power / Engine SW Light Power switch illumination ON/OFF Operate with power switch on (IG) and the vehicle stopped.