Customize Parameters [10/2013 - ]
WARNING: This page is about a different variant/trim than selected.
- CUSTOMIZE VEHICLE PROXIMITY NOTIFICATION SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Utility / Customize Setting / Others.
- Select the setting by referring to the table below.VEHICLE PROXIMITY NOTIFICATION SYSTEM
Display Default Content Setting Relevant ECU Proximity Sound Volume Adjustment Standard Function that sets the warning sound volume in 3 levels Standard, Standard +1, Standard +2 Vehicle Approaching Speaker Controller Proximity Sound Level Increase (Vehicle Starting) ON Function that amplifies the warning sound when the vehicle starts off ON or OFF Vehicle Approaching Speaker Controller Proximity Sound Control (Vehicle Stationary) OFF Function that sets the warning sound when the vehicle is stopped ON or OFF Vehicle Approaching Speaker Controller