LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Two >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 16 (Vehicle Proximity Notification System (Diagnostics - Introduction) (Plug-In)) >> Vehicle Proximity Notification System >> DTC Check / Clear [10/2013 - ] >> DTC Check / Clear [10/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [10/2013 - ]

WARNING: This page is about a different variant/trim than selected.
  1. DTC CHECK USING TECHSTREAM 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Trouble Codes.
    5. Check for DTCs.
  2. DTC CLEAR USING TECHSTREAM 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Trouble Codes.
    5. Clear the DTCs by pressing the YES button on the Techstream display.
scientia non olet · About LEMON Manuals