LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Two >> Repair and Diagnosis (Single Page) >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery System (Diagnostic Codes & Symptom Tests) (Except Plug-In) >> Hybrid Battery System >> DTC P3011-123: Battery Block 1 Becomes Weak; DTC P3012-123: Battery Block 2 Becomes Weak; DTC P3013-123: Battery Block 3 Becomes Weak; DTC P3014-123: Battery Block 4 Becomes Weak; DTC P3015-123: Battery Block 5 Becomes Weak; DTC P3016-123: Battery Block 6 Becomes Weak; DTC P3017-123: Battery Block 7 Becomes Weak; DTC P3018-123: Battery Block 8 Becomes Weak; DTC P3019-123: Battery Block 9 Becomes Weak; DTC P3020-123: Battery Block 10 Becomes Weak; DTC P3021-123: Battery Block 11 Becomes Weak; DTC P3022-123: Battery Block 12 Becomes Weak; DTC P3023-123: Battery Block 13 Becomes Weak; DTC P3024-123: Battery Block 14 Becomes Weak [10/2013 - ] >> Confirmation Driving Pattern
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Driving Pattern

  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off and wait for 30 seconds or more.
  5. Turn the power switch on (IG) and turn the Techstream on.
  6. Turn the power switch on (READY).
  7. Perform a universal trip.
  8. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
  9. Read the current DTCs.

    HINT: 

    • If a current DTC is output, the system is malfunctioning.
    • If a current DTC is not output and want to confirm permanent DTC, perform the following procedure.
  10. Check that permanent DTCs are cleared.
scientia non olet · About LEMON Manuals