LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Meter / Gauge / Display (Diagnostics - Introduction) (Plug-In)) >> Meter / Gauge System >> Initialization [10/2013 - ] >> Initialization [10/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization [10/2013 - ]

WARNING: This page is about a different variant/trim than selected.
  1. MAINTENANCE REQUIRED REMINDER RESETTING PROCEDURE 

    HINT: 

    The ODO/TRIP change switch is located on the left side of the multi-information switch (steering pad switch assembly).

    1. Turn the power switch on (IG).
    2. Press the ODO/TRIP change switch until the TRIP A meter appears.
    3. Turn the power switch off.
    4. Turn the power switch on (IG) while pressing and holding the unit change switch. Hold the unit change switch until the following conditions are met and 5 seconds have elapsed.
      1. The TRIP A meter shows "000000".
      2. The multi-information display shows that the reset is complete.