Entry Interior Alarm does not Sound [09/2013 - ]: Procedure
- CHECK WHETHER EV SYSTEM
- Check that the EV system starts.
HINT:
The EV system starts when the correct warning buzzer signal is transmitted from the steering lock ECU to the combination meter.
OK
EV system starts.
NG → See step 4
OK: Go to next step
- Check that the EV system starts.
- CHECK COMBINATION METER ASSEMBLY (OPERATION)
- Place the electrical key transmitter sub-assembly in an undetectable area outside the vehicle, and turn the power switch on (IG) with all doors closed.
OK
Warning buzzer sounds once.
NG → See step 5
OK → See step 3
- Place the electrical key transmitter sub-assembly in an undetectable area outside the vehicle, and turn the power switch on (IG) with all doors closed.
- REPLACE CERTIFICATION ECU (ECU AGGREGATION BOX ASSEMBLY). Refer to REMOVAL [09/2013 - ]
- Go to SMART KEY SYSTEM (for Start Function). Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ]
- Go to METER / GAUGE SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ]