Inspection Procedure
NOTE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
- The power window control system uses a LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ] . Troubleshoot the power window control system after confirming that the communication system is functioning properly.
- If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [09/2013 - ] .
- When the ECU determines that the front power window regulator motor assembly LH has a malfunction, DTC B2311 is stored.