DTC B1786: Front Occupant Classification Sensor RH Collision Detection [09/2013 - ]: Description

DTC B1786 is stored when the occupant detection ECU receives a collision detection signal, which is sent by the front occupant classification sensor RH when an accident occurs.

DTC B1786 is also stored when the front seat assembly RH is subjected to a strong impact, even if an actual accident has not occurred.

However, when the occupant detection ECU outputs a collision detection signal, even if the vehicle has not been in a collision, DTC B1786 can be cleared by conducting the zero point calibration and sensitivity check.

Therefore, if DTC B1786 is output, first perform the zero point calibration and sensitivity check.

HINT: 

• When DTC B1650/32 is stored as a result of troubleshooting the airbag system, perform troubleshooting for DTC B1786 of the occupant classification system.
• Use the Techstream to check for DTCs of the occupant detection ECU, otherwise the DTCs cannot be read.