Fail-Safe Chart [08/2016 - ]
- FAIL-SAFE FUNCTION
- If the following malfunctions occur, the 4WD ECU assembly will stop the function of the dynamic torque control AWD system or partly change the function to control the system.
- If a malfunction occurs in the sensor signal or actuator, the flow of electricity to the 4WD linear solenoid of the transmission coupling assembly is prohibited. As a result, the system enters front wheel drive condition.
- When a component of the system malfunctions and the fail-safe function activates, the component operation is prohibited. However, if the system is controlling the component and the fail-safe function activates, the system operation is gradually stopped to prevent sudden changes in the vehicle condition.
- When system control is not possible, a warning message is displayed to stop system operation.